Maggie -- Color addition/ subtraction

.

Picture one illustrates the red and the blue mixing shows a clear picture of the color magenta. The blue and green combine and make cyan. Picture two is a great picture because it really demonstrates all the colors very well. The red and green show yellow very well. The blue and green and a great cyan color and green red and blue make WHITE!! And if you look at the bottom the red and blue intersect it makes magenta but it is hard to see and that's why i took a picture of picture one. These lights look great!

Finding speed of light using microwave and CHEESE by Amb Boswell

To find the speed of light using a microwave I first looked at the inside of my microwave to find the Frequency. The frequency listed was 2.45 billion . I then put cheese on a piece of bread and microwaved it for 20 seconds. I noticed two spots that were more melted than the rest of the cheese. I measured the distance between these two spots, which was 5.8 cm. To find the speed, I used the equation: v= Frequency(2.45billion) times the wave length (5.8*2=11.6). So 2,450,000,000 * 11.6= 28,420,000,000. I then divide this number by 100, to convert centimeters into meters. So for my final answer I got 284,200,000 m/s  The actual speed of light is 299,792,458 m/s. So I am just slightly off. 

In this experiment, I spread butter on a piece of bread and looked at where it melted to discover the wavelength of that oven. Afterwards, I looked on the the inside of the oven cover to find the output of the oven. Using these measurements i was able to form this equation. 2,450,000,000H * 12cm Which came to 2.940x10^10. Seeing as how the speed of light is around 299,792,458 m/s, my conclusion isn't particularly far off the mark.  

3d Photo

This photo was created by taking one photo with a digital camera, moving the camera around 8 cm to the left in order to take the image on the right, then i put the two together in photoshop in order to create the 3d effect.

Vincent Case

We took a photo of the stairs and took another after covering our left eye. We then uploaded the photos on Adobe Photo Shop to create the 3D effect. The 3D effect works using the 3D glasses because your left eye sees through the red filter while the right sees through the blue filter. When combined you see the two images as one which gives it the 3D effect. All one needs to do is use 3D glasses regardless of how far one is from the screen.

-Konstantina and Tammy

Meghan Dragman

Photo #1

Photo #2


Photo #1 illustrates color addition. Magenta and cyan can be combined together to appear blue. Magenta and cyan are complements of the primary light colors red and green. In the color wheel, it shows that when blue and green are combined, they make cyan. When red and blue are combined, they show magenta. This means cyan and magenta both have complements of blue. When cyan and magenta are combined, magenta's green is absorbed, leaving blue, and cyan's red is aborbed also leaving blue. In the end, the light that appears is blue because the complements are being aborbed and the blue is left over.
Photo # 2 illustrates color subtraction because when cyan and red are combined, no light appears. These two colors create no light, or black, because cyan and red are complements of eachother. Red absorbs cyan light, and cyan absorbs red light. Since they both absorb eachother, they block light. It appears black.

I made my glasses 3D. First, I took two pictures (the second one being moved slightly), then I uploaded them to my computer and turned on a grayscale fliter. After that, I turned one image to full cyan and the other to full red. When I had done that, I created an RGB layer for one of them and pasted the opposing image onto its layer. Finally, I made a few slight adjustments and got a 3D photo.
This works because when you have two opposing colored filters (in this case red and cyan) they pop out more due to not being able to blend with each other well.
All you need to be able to see these 3D glasses are 3D glasses.
-Banipal Georges

Meghan Dragman

 

     I made this 3D photo by taking a picture of the same object twice. I made the photo by opening the photos in photoshop and followed the directions on the NASA website. I had to make it have a 3D effect so we made the picture turn gray and added colors to the picture. The 3D effect worked with colored filters because the colors im trying to make show up is the red, blue, and green color. You need to wear 3D glasses in order the see the 3D image.

This picture shows collor subtraction in it's most basic form, where a red light is shined on a white board.  However, the cyan sheet in the picture absorbs red light, and since there is no green or blue light. the covered part appears black.

Vincent Case

Syed and Nathan's 3D blog

took 2 pictures of me in different perspective, uploaded to photo shop and then put up both pictures to gray scale. put both back to RGB and took 1 picture and made it red and finally to complete it we put it together. to see the photo pop out you need the 3d glasses to see it happen.

First we used Adobe Photoshop to construct two photos that we put together to make a 3-D photo. When we grayscaled the photo and used the color red over it, it visible that the pictures together were 3-D. The 3-D effect is produced using color filters. Using two pictures, causes the 3-D effect because our eyes see depth within the two pictures and when we changed the coloring to RGB and wore the glasses it made the pictures look 3-D. Our eyes are about 2-3 inches apart which causes each eye to see the picture from different angles. Our eyes see 3-D because the red and blue from the colored filters contrast. In order to see the 3-D picture, you need to use the color filters so the colors can contrast and your eyes can see at different angles. (3-D glasses)

Frankie and Hope

Color Addition/ Subtraction Photo by Anne Margaret Boswell

 

Anne Margaret Boswell

Color Addition/ Subtraction Photo.

Before: (RGB lights)       

 After: Cyan Filter

After: Yellow filter

After: Magenta Filter

                Filters are used to absorb certain primary colors (RGB) of light and allow any left over primary colors (RGB) to be transmitted. When these primary colors hit a colored filter (CYM), certain primary colors appear, but some cannot be seen. As shown, when RGB hits a Cyan filter, only blue and green appear (transmitted), but  red is being absorbed, so you cannot see it very well. Next, RGB is shined on a yellow filter, but this time, just Red and Green are being transmitted, and blue is being absorbed. Lastly, to prove the color addition/ subtraction model, I used a magenta filter. Red and blue are transmitted, so they are visible, but green is absorbed, and not visible.

The first pictures in these posts show what the lights look like without any filament in front of them. In the second photo, you see these red, blue, green lights covered by a yellow, magenta, and red filament. The green light now looks cyan now because blue and yellow make cyan. The green light now doesn't show because it is covered by a magenta filament and green and magenta absorb each other. The red light still looks red because it is covered by a red filament which does nothing to the light passing through.